琼胶/SiO₂复合纤维的制备及性能研究     

吴大伟  颜廷波  李腾飞  王应霞  肖玉斌  薛志欣  夏延致 《海洋科学》2020,44(10):39-45

利用湿法纺丝技术制备了琼胶/SiO₂复合纤维，对琼胶分子在溶液中的分散性、纺丝液流变性、纤维的形貌、化学结构分别用DLS、旋转黏度计、SEM、FTIR和XRD进行了表征，并对纤维的力学性能、热性能和吸湿性能进行了测定。研究结果表明：琼胶分子在溶液中呈纳米尺度分布，纺丝液具有良好的流动性；琼胶/纳米SiO₂复合纤维具有良好的形态。随着纳米SiO₂的添加量逐渐提高，复合纤维的力学拉伸强度先增强后降低，复合纤维的吸水性降低，复合纤维的热稳定性逐渐增强。结合复合纤维综合性能，纳米SiO₂的最佳添加质量分数为0.5%。  相似文献   

牡蛎对浮游植物群落下行控制作用的围隔实验研究     

王兆慧  张光涛 《海洋科学》2020,44(9):47-53

牡蛎的滤食作用不但能控制浮游植物丰度，还能通过摄食选择性影响群落结构。通过在较高营养水体的围隔实验表明，牡蛎养殖在持续磷限制条件下，促使浮游植物群落由甲藻向小型硅藻优势转变。实验结束时对照组中浮游植物群落由扁压原甲藻主导，占总丰度的77%；而牡蛎养殖组新月柱鞘藻丰度占比达到93%。牡蛎养殖组中，甲藻去除速率随养殖密度增长，但是硅藻最终丰度在高密度牡蛎组最高。研究结果说明大量的贝类养殖能够提升小型链状硅藻的优势度，增加此类赤潮发生风险。  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献   

Global Statistical Assessment and Cross-Calibration with Jason-2 for Reprocessed HY-2 A Altimeter Data     

Maofei Jiang  Ke Xu  Yalong Liu 《Marine Geodesy》2018,41(3):289-312

HY-2 A (Haiyang-2 A) satellite was launched on August 16, 2011 and radar altimeter is one of its main payloads. We reprocessed two years of HY-2 A altimeter sensor geophysical dataset records (SGDR) data. This paper presents the main results in terms of reprocessed HY-2 A altimeter data quality: verification of data availability and validity, monitoring several relevant altimeter parameters, and assessment of the HY-2 A altimeter system performances. A cross-calibration analysis of reprocessed HY-2 A altimeter data with Jason-2 was conducted. The reprocessed HY-2 A altimeter data show good quality and have a low level of noise with respect to Jason-2. The same geophysical correction methods were used to calculate the sea surface height (SSH) for the two missions. The mean standard deviations of the crossover differences for HY-2 A and Jason-2 are 5.24 cm and 5.34 cm, respectively. The mean standard deviation of the crossover differences between HY-2 A and Jason-2 is 5.37 cm. These show that HY-2 A can provide SSH measurements at almost the same level of accuracy as Jason-2. The relative SSH bias between HY-2 A and Jason-2 due to the Ultra Stable Oscillator (USO) drift is obviously observed, and it can affect the calculation of mean sea level and should be further studied and corrected.  相似文献   

两种造礁石珊瑚对海水酸化和溶解有机碳加富的响应*     

郭亚娟  周伟华  袁翔城  廖健祖  江雷  黄晖 《热带海洋学报》2018,37(1):57-63

文章选择鹿回头近岸海域常见的板叶角蜂巢珊瑚(Favites complanata)和十字牡丹珊瑚(Pavona decussata)为研究对象, 采用室内连续培养的方法, 探究两种不同造礁石珊瑚对酸化和溶解有机碳(DOC)加富的响应。结果表明: 酸化(pH 7.6)并不会影响两种珊瑚的钙化速率和生长速率; 但DOC加富(524.03±78.42μmol•L^-1)使两种珊瑚的钙化速率分别降低67%和47%、生长速率降低59%和40%。当二者共同作用时, 两种珊瑚的钙化速率降低30%和11%、生长速率降低46%和59%, 大多没有DOC单独作用时强烈, 表现出一定的拮抗作用。两种珊瑚共生虫黄藻叶绿素荧光指数(F_v/F_m)均升高后降低, 板叶角蜂巢珊瑚F_v/F_m最先降低。实验表明, 这两种珊瑚虽然对海洋酸化的敏感度不高, 但是对有机物加富有不同的响应, 板叶角蜂巢珊瑚更为敏感, 可能导致这两种珊瑚在未来环境变化中有不同命运。  相似文献   

Influence of dissolution/reprecipitation reactions on metamorphic greenschist to amphibolite facies mica 40Ar/39Ar ages in the Longmen Shan (eastern Tibet)          下载免费PDF全文

Laura Airaghi  Clare J. Warren  Julia de Sigoyer  Pierre Lanari  Valérie Magnin 《Journal of Metamorphic Geology》2018,36(7):933-958

Linking ages to metamorphic stages in rocks that have experienced low‐ to medium‐grade metamorphism can be particularly tricky due to the rarity of index minerals and the preservation of mineral or compositional relicts. The timing of metamorphism and the Mesozoic exhumation of the metasedimentary units and crystalline basement that form the internal part of the Longmen Shan (eastern Tibet, Sichuan, China), are, for these reasons, still largely unconstrained, but crucial for understanding the regional tectonic evolution of eastern Tibet. In situ core‐rim ⁴⁰Ar/³⁹Ar biotite and U–Th/Pb allanite data show that amphibolite facies conditions (~10–11 kbar, 530°C to 6–7 kbar, 580°C) were reached at 210–180 Ma and that biotite records crystallization, rather than cooling, ages. These conditions are mainly recorded in the metasedimentary cover. The ⁴⁰Ar/³⁹Ar ages obtained from matrix muscovite that partially re‐equilibrated during the post peak‐P metamorphic history comprise a mixture of ages between that of early prograde muscovite relicts and the timing of late muscovite recrystallization at c. 140–120 Ma. This event marks a previously poorly documented greenschist facies metamorphic overprint. This latest stage is also recorded in the crystalline basement, and defines the timing of the greenschist overprint (7 ± 1 kbar, 370 ± 35°C). Numerical models of Ar diffusion show that the difference between ⁴⁰Ar/³⁹Ar biotite and muscovite ages cannot be explained by a slow and protracted cooling in an open system. The model and petrological results rather suggest that biotite and muscovite experienced different Ar retention and resetting histories. The Ar record in mica of the studied low‐ to medium‐grade rocks seems to be mainly controlled by dissolution–reprecipitation processes rather than by diffusive loss, and by different microstructural positions in the sample. Together, our data show that the metasedimentary cover was thickened and cooled independently from the basement prior to c. 140 Ma (with a relatively fast cooling at 4.5 ± 0.5°C/Ma between 185 and 140 Ma). Since the Lower Cretaceous, the metasedimentary cover and the crystalline basement experienced a coherent history during which both were partially exhumed. The Mesozoic history of the Eastern border of the Tibetan plateau is therefore complex and polyphase, and the basement was actively involved at least since the Early Cretaceous, changing our perspective on the contribution of the Cenozoic geology.  相似文献   

基于三维激光扫描技术的钢结构扰度检测及应用     

宋云记  王晓民  王智 《测绘通报》2020,(12):160-163

钢结构在长期荷载及不均匀受力的作用下会产生空间变形，其中扰度是其重要的衡量指标。通常采用全站仪采集钢结构轴线上若干特征点进行分析、计算，由于钢结构特征点难以捕捉，测量存在误差，并且有限的空间离散点难以全面反应钢结构空间变形。本文采用徕卡RTC360三维激光扫描进行钢结构扰度测量；介绍了其作业流程及数据处理方法；利用标靶将各个测站的三维点云拼接成一个整体；采用拟合的方法提取空间特征点及轴线；利用三维点云构建空间模型，并与设计模型进行碰撞分析；可全面地反映钢结构的空间变形情况。  相似文献   

基于移动三维扫描技术的隧道管片错台分析及应用     

赵亚波  王智 《测绘通报》2020,(8):160-163

错台是地铁隧道的主要病害之一，通常是由于盾构机施工控制不好或是隧道荷载发生变化导致，错台的发生也会引起隧道收敛变形及渗水等其他病害。传统手段主要采用人工巡检等方式进行错台情况的检测，由于受夜间窗口期短的影响，该方法效率低，成果难以精确量化。研究采用基于轨道的隧道移动三维激光扫描系统对隧道错台进行检测，通过快速获取隧道三维点云生成正射影像，并基于正射影像进行管片的划分及里程的匹配，进而根据每一环的三维点云信息计算管片错台情况。以青岛地铁2号线为例，本文介绍了移动扫描技术在地铁隧道管片错台检测的应用情况，为该技术在其他隧道的推广应用提供了一定的借鉴意义。  相似文献   

激光扫描与无人机一体化控制下的复杂体育场馆高精度三维重建     

杨俊  王志鹏  祝凯  李淑红  焉石  胡春梅 《测绘通报》2020,(12):21-26

针对复杂体育场馆外部精细建模在完整性和精度方面存在的问题，本文提出了地面控制、地面激光扫描、无人机建模控制一体化的高精度建模方法。首先应用特制标志建立区域内控制、扫描、无人机高精度一体化坐标系统；其次对地面多站激光扫描点云结合控制坐标进行区域整体平差配准，生成一体化坐标系统下高精度地面点云模型；然后应用无人机数据和控制点生成一体化坐标下的高精度顶部数据；最后融合两种数据生成对象完整高精度精细模型。试验证明，整体平差解算方法可实现多站点云的高精度配准，一体化控制可实现非同源异质数据高精度融合，解决了复杂建筑对象的高精度建模问题，具有很大的实用价值。  相似文献   

基于深度学习的目标检测定位系统设计与实现     

王俊强  李建胜  程相博  杨戬峰 《测绘与空间地理信息》2020,(1):133-136,144

针对传统遥感影像目标检测方法效率不高,并且无有效手段对检测信息进行管理利用的问题,提出了在B/S构架下基于深度学习的目标检测及定位方法。通过集成深度学习框架、WebGIS以及数据库,实现了集遥感影像目标检测、展示及管理于一体的目标检测定位系统,满足多用户基于前端浏览器的并发目标检测需求。利用网格划分策略,实现了基于前端的大区域范围的目标快速检测。基于某机场飞机目标及某城市区域运动场目标检测结果表明:本文设计的目标检测定位系统能够在前端实现目标快速检测定位,具有较高检测精度,并可有效管理检测信息,为深度学习循环再利用提供数据支撑。  相似文献